Squeeze Face by Proxy

Squeeze Edge by Proxy

Squeeze the diagonal of a face according to proximity from target points . Values are calculated in percentage.

Values Greater than 1 = Generates Stretch outwards and creates overlapping. Values Lower than 1= Generates Squeeze inwards

(0 = no change, 0.9 = 10% decrease, 1.1 = 10% increase).

Steps

1.Select target points.

2. Select the target mesh from the Face > Squeeze Face by Proxy menu.

4. Set Squeeze values in Command Line (min, max values).

5. Press Enter to execute.

Note: The Echo method is incremental.

Options

(the mesh was subdivided using the "+" method and pivoting about the face center)

Original Mesh Values: Min 0.2, Max 0.9

Both - Squeeze both Main Mesh and Reference Mesh faces according to the selected target points

Command Activation Methods

Main Mesh Ref Mesh Both

Face > Squeeze Face by Targets > Main

Face > Squeeze Face by Targets > Reference

Face > Squeeze Face by Targets > Both

Set min and max values in Command Line: "Squeeze by Proxy (Min, Max):"