Face Echo

Face Echo

Echo Mesh / Reference faces. Values are calculated in percentage.

Values Greater than 1 =  Generates Echo outwards and creates overlapping. Values Lower than 1= Generates Echo inwards

(0 = no change, 0.9 = 10% decrease, 1.1 = 10% increase).  The Echo method is incremental.

Steps

1. Generate an offset to the original mesh.  

2. Check the Main / Ref option.

3. Set Echo value in the text box.

4. Press the Echo button.

Options

• Echo Values - Use the mouse wheel to change Echo value in real time. Scrolling with the Mouse Wheel will change the value (0.01 increment) when the mouse is over the text box. Hold the Shift and use the Mouse Wheel to change the values faster (1.0 increment).

• Main - Echo Main Mesh faces

• Reference - Echo Reference faces

• Both - Echo both Main Mesh and Reference Mesh faces

Command Activation Methods

• Interface (GUI)

(1)                                     (2)                                      (3)

or:

  Main Mesh            Ref Mesh               Both

• Menu

Mesh > Face Echo > Main

Mesh > Face Echo > Reference

Mesh > Face Echo > Both

• Command Line

Echo

• Keyboard

Copyright © <2008-2011>, <Dr. Eyal Nir>