Echo to Edge by Targets

Echo to Edge by Proxy

Echo Mesh / Reference faces towards the first edge of each face The first Edge is marked with the direction arrow when displaying the Face Map. Values are calculated in percentage.

Values Greater than 1 = Generates Echo outwards and creates overlapping. Values Lower than 1= Generates Echo inwards

(0 = no change, 0.9 = 10% decrease, 1.1 = 10% increase).

Steps

1.Select target points.

2. Generate an offset to the original mesh (Optional).

3. Select the target mesh from the Face > Echo to Edge by Targets menu.

4. Set Echo values in Command Line (min, max values).

5. Press Enter to execute.

Note: The Echo method is incremental.

Options

Main - Echo Main Mesh faces according to the selected target points

Original Mesh Values: Min 0.3, Max 0.9

Reference - Echo Reference faces according to the selected target points

Both - Echo both Main Mesh and Reference Mesh faces according to the selected target points

Command Activation Methods

Interface (GUI)

Main Mesh Ref Mesh Both

Face > Echo to Edge by Targets > Main

Face > Echo to Edge by Targets > Reference

Face > Echo to Edge by Targets > Both

Command Line

Set min and max values in Command Line: "Echo to Edge by Proxy (Min, Max):"

Keyboard