Echo to Edge

Echo Mesh / Reference faces towards the first edge of each face The first Edge is marked with the direction arrow when displaying the Face Map. Values are calculated in percentage.

Values Greater than 1 = Generates Echo outwards and creates overlapping. Values Lower than 1= Generates Echo inwards

(0 = no change, 0.9 = 10% decrease, 1.1 = 10% increase). The Echo method is incremental.

Steps

1. Generate an offset to the original mesh (Optional).

2. Select the target mesh from the Face > Echo to Edge menu.

3. Set Echo value in Command Line.

4. Press Enter to execute.

Options

Main - Echo Main Mesh faces: Value set to 0.3

Reference - Echo Reference faces: Value set to 0.3

Both - Echo both Main Mesh and Reference Mesh faces

Command Activation Methods

Interface (GUI)

Main Mesh Ref Mesh Both

Face > Echo to Edge > Main

Face > Echo to Edge > Reference

Face > Echo to Edge > Both

Command Line

Keyboard