Echo by Targets

Echo Mesh / Reference faces based on proximity to the target points. Values are calculated in percentage.

Values Greater than 1 = Generates Echo outwards and creates overlapping. Values Lower than 1= Generates Echo inwards

(0 = no change, 0.9 = 10% decrease, 1.1 = 10% increase).

Steps

1.Select target points.

2. From the Face menu select the Echo by Targets option or type 'Echovar' ↵ in the command line.

3. Set min and max values in the command line and press the ↵ button.

Note: The Echo method is incremental.

Options

Original Mesh Echovar Values: Min 0.3, Max 0.9

Original Mesh Swapped value: Min 0.9, Max 0.3

Both - Echo both Main Mesh and Reference Mesh faces according to the selected target points

Command Activation Methods

Main Mesh Ref Mesh Both

Face > Echo by Targets > Main

Face > Echo by Targets > Reference

Face > Echo by Targets > Both

Echovar

Set min and max values in Command Line: "Echo by Proxy (Min, Max):"