Echo by Random

Echo by Random

Echo Mesh / Reference faces based on random values. Values are calculated in percentage, between the minimum and maximum specified.

Values Greater than 1 =  Generates Echo outwards and creates overlapping. Values Lower than 1= Generates Echo inwards

(0 = no change, 0.9 = 10% decrease, 1.1 = 10% increase). 

Steps

1. From the Face menu select the Echo by Random Option.

2. Set min and max values in the command line and press the ↵ button.

     Note: The Echo method is incremental.

Options

• Main - Echo Main Mesh faces

Original Mesh                                             Values: Min 0.2, Max 0.9

• Reference - Echo Reference faces

• Both - Echo both Main Mesh and Reference Mesh faces 

Command Activation Methods

• Interface (GUI)

  Main Mesh            Ref Mesh               Both

• Menu

Face > Echo by Random > Main

Face > Echo by Random > Reference

Face > Echo by Random > Both

• Command Line

Set min and max values in Command Line: "Echo by Random (Min, Max):"

• Keyboard

Copyright © <2008-2011>, <Dr. Eyal Nir>